Editor’s Pick

New right-angle heads suitable for automation

THIS WEEK’S HIGHLIGHTS

February 6, 2026

German Machine Tool Output Expected to Grow

February 6, 2026

DN Solutions Completes Heller Acquisition

Editorial Roundup

UK NEWS View All

Next Phase For LSIC

PUBLISHED: February 6, 2026

The NCC, part of the High Value Manufacturing Catapult and the University of Bristol, has confirmed that...

Manufacturing sector lags in AI adoption

PUBLISHED: February 6, 2026

Although interest in AI across UK businesses is at an all-time high in many commercial...

FourJaw signs 50 new manufacturers

PUBLISHED: February 6, 2026

FourJaw, a provider of production monitoring technology, signed almost 50 new customers in 2025 as...

Scholarship to support women in engineering

PUBLISHED: February 6, 2026

Broadcaster, journalist and author Steph McGovern returned to her Teesside roots recently to launch a...

Advanced inventory management on show at Southern

PUBLISHED: February 6, 2026

Inventory management specialist Tooling Intelligence demonstrated four control solutions at the Southern Manufacturing 2026 exhibition...

New right-angle heads suitable for automation

PUBLISHED: February 6, 2026

A new range of tool-holding heads designed to mill and drill components at right angles...

EPS Services explains bandsaw tooth pitch

PUBLISHED: January 30, 2026

When choosing a bandsaw blade, tooth pitch is often treated as a secondary consideration. Blade...

Cutting-edge stainless steel sawing: The real results

PUBLISHED: January 30, 2026

Since UK-based KR Saws was founded in 2004, the stainless steel industry has been one...

Why bandsaw accuracy drops and how to fix it fast

PUBLISHED: January 30, 2026

When the cutting accuracy of a bandsaw drops, the impact is immediate: uneven cuts, higher...

A heritage of excellence and strategic diversification

PUBLISHED: January 30, 2026

Since its 2013 founding, Antrim-based Anchor Fixings has established itself as a leading supplier of...

New director for MAPAL

PUBLISHED: February 6, 2026

Mark Lich is now director of global key account management at cutting tool manufacturer MAPAL,...

Stratasys launches post-processing partnerships

PUBLISHED: February 6, 2026

3D printer manufacturer Stratasys has launched its Post Processing Partnership Programme, an initiative that simplifies...

German Machine Tool Output Expected to Grow

PUBLISHED: February 6, 2026

After two years of decline, the German machine tool industry expects production to grow by...

DN Solutions Completes Heller Acquisition

PUBLISHED: February 6, 2026

DN Solutions, the world’s third largest and Korea’s leading machine tool manufacturer, has completed its...

Drion·tec D-Spade D5142 exchangeable-tip drill unveiled

PUBLISHED: February 6, 2026

With the new Drion·tec D-Spade D5142 exchangeable-tip drill, Walter is launching the world's first drill of...

Harvey Performance launches Helical Solutions in Europe

PUBLISHED: February 6, 2026

As of January 2026, the leading North American end mill brand of Harvey Performance Co,...

MAPAL expands NeoMill milling cutter product range

PUBLISHED: February 6, 2026

MAPAL is expanding its NeoMill milling cutter product range for the semi-finishing and finishing of...

Tungaloy continues its ‘Think Green’ sustainability journey

PUBLISHED: February 6, 2026

Around the world, manufacturers are rethinking how industry can grow while protecting the environment for...

TaeguTec releases next-generation miniature milling cutters

PUBLISHED: February 6, 2026

Cutting tool technology specialist TaeguTec has launched its WIN-MILL series, featuring the CVKT line of...

Horn introduces latest indexable-insert mills

PUBLISHED: February 6, 2026

Tooling manufacturer Horn has expanded its DA milling programme for corner, face and plunge milling....

PTG Precision automates production with Dugard SMEC

PUBLISHED: January 23, 2026

PTG Precision Engineers - an engineering specialist with over 40 years of experience serving the nuclear, aerospace and energy sectors...

Two further Citizen CNC lathes bring total to 21

PUBLISHED: January 23, 2026

The decision to set up a turned parts subcontracting business at the start of the worst economic crisis in living...

Delta XD achieves Nadcap accreditation for measurement

PUBLISHED: January 16, 2026

Basingstoke-based Delta XD, a Zeiss-certified metrology partner and provider of advanced dimensional inspection services, has achieved Nadcap AC7130/4 accreditation for...

Mitutoyo technology ensures quality at Purso-Tools

PUBLISHED: January 16, 2026

In the manufacture of demanding machined components, maintaining precision requires advanced quality control strategies and technologies, and smooth collaboration with...

OEMETA COOLANT IMPROVES TOOL LIFE 20% AND CUTS FLUID COSTS 100%

PUBLISHED: January 16, 2026

Margins in subcontract machining are measured in microns and seconds, with every processvariable presenting a cost implication that demands scrutiny....

Pre-Met MD recognised for industry contribution

PUBLISHED: January 9, 2026

Metal pressings specialist Pre-Met reports that its managing directorJames Leng has been recognised as one of Britain’s Great 100 -...

Olicona Products Brings Sheet Metalworking In-House

PUBLISHED: January 2, 2026

Olicana Products has for many years prided itself on providing a top-quality, high-volume, CNC tube laser cutting and bending service...

Doncasters investing $52m in German plant

PUBLISHED: December 5, 2025

Doncasters, an international manufacturer of high-precision alloy components made for the most demanding conditions, will invest $52m in its Bochum,...

Inline cleaning after deburring for residue-free surfaces

PUBLISHED: December 5, 2025

Founded in 2007, VULIC ECM GmbH & Co KG initially focused on the development and manufacture of customer-specific devices (tools)...

BUILDING SUCCESS WITH THE LATEST MANUFACTURING TECHNOLOGIES

PUBLISHED: December 5, 2025

When three experienced machinists decided to turn their shared dream into reality, theyknew success would depend on making the right...

Starrag RCS 8.0 CAM software suite now available

PUBLISHED: January 9, 2026

Starrag’s new RCS 8.0 CAM software for the machining of turbine blades now has learning capabilities. Demonstrating over 30 years...

Cetec ERP announces two new AI-driven features

PUBLISHED: January 9, 2026

At the recent ERPALOOZA user conference in Texas, Cetec ERP unveiled two major AI-powered automation tools - Document Scan &...

HMI/SCADA software adds advantageous features

PUBLISHED: September 14, 2025

Emerson has released Movicon.NExT Version 4.4, a modern HMI and SCADA platform. Movicon.NExT HMI/SCADA empowers users to create interoperable automation...

Swiss machining and AI-led automation transform CAM

PUBLISHED: September 12, 2025

Hexagon’s Manufacturing Intelligence Division has unveiled a major release of its Esprit Edge CAM software, addressing productivity and skills challenges...

Max Hilscher hits peak performance with Vericut

PUBLISHED: September 12, 2025

When things go smoothly, everything falls into place – Max Hilscher GmbH is a striking example of how the right...

KS Composites on fast track with hyperMILL

PUBLISHED: September 12, 2025

Imbued in the motorsport industry since Kelvin Smith opened the doors for business in 1985, KS Composites is a manufacturer...

PTC launches Arena to mitigate supply chain risks

PUBLISHED: September 12, 2025

PTC has announced the release of its Arena product lifecycle management (PLM) and quality management system (QMS) solution that will...

CADCAM delivers major productivity gains for Nova

PUBLISHED: September 12, 2025

Nova Laboratories’ investment in BobCAD-CAM software and associated programmer training from Mills CNC’s Training Academy, is improving the productivity and...